2000 / 2300 series

ELECTRONIC SERIES

Electronic levels leverage the spirit levels know-how and experience with microelectronics and computer technology.

THEORY OF OPERATION: A damped pendulum, without mechanical resistance, settles in position according to terrestrial gravity with the highest precision. The position of the pendulum with respect to the reference plane bearing the level is tracked by a differential sensor with infinite resolution.

3200 series

Electronics convert this variation into an electrical signal which is proportional to the deviation angle.
Electronic levels are 100 times more sensitive and stable than the best spirit bubble levels. Operating these measuring devices is straightforward and speedy.
Associated to an electronic metering unit with measuring display and controls, they provide numerous functionalities. They are perfectly suited for control measurements requiring outstanding repeatability and stability over time. They allow for the control and monitoring of the levelling, the flatness, the parallelism or the squareness of surfaces, flat and cylindrical, as well as the measurement of flexure and constraints.

4000 series

Electronic levels are especially suitable in the fields of mechanical engineering, aerospace manufacturing, ship building, armament systems as well as the monitoring of civil engineering works, of thermal and atomic power-plants, of radar tuning ...

They are essential to the measurement of the flatness deviation of SURFACE PLATES.

FURTHER TECHNICAL INFORMATION AVAILABLE ON REQUEST.

PRO 360 / PRO 3600 - ELECTRONIC CLINOMETERS

These electronic devices measure and display directly and accurately the value of the angle between the level case and the horizontal direction or any horizontal / vertical surface.

The PRO 3600 is fitted with a RS 232 connection.

5100 / 5200 - TILT SENSOR W/ ANALOG OUTPUT

Performances:
Total measuring range: 60° - Linear range: ± 45° - Resolution: 0.001°
Linear deviation: ± 0.1° (0° to 10°), ± 1% of inclination reading (10° to 45°)
Repeatibility: 0.05° - Measurement error for a transverse inclination of 45° < 1% - Time constant: 0.3 sec.
Signal band width: 0.5 Hz - Operating temperature range: -30° to +65°C.